Concert AVR-7 / AVR-9 and Maestro M5 / M9 Firmware, Manual, and Control System driver downloads

• Related Articles

• Firmware: Update instructions for AVR 7/9 and Maestro M5/M9.

  AVR-7/9 or Maestro M5/M9 Firmware update instructions: IMPORTANT NOTES Dirac files: Firmware updates clear any Dirac calibration settings that are currently uploaded to the AVR/Maestro. Make sure you have access to the saved Dirac calibration file on ...

• Dirac Live: Setup for Maestro M5/M9 processors and AVR 7/9 receivers.

  Initial Setup Make sure the AVR 7/9 or M5/9 is connected to the same network as your computer. It doesn’t matter if the computer is connected via hardware or wifi, as long as it is on the same network. If your network is DHCP, the amplifier will ...

• Firmware Update instructions for X7 and X9 processors and XR-4/6/8 receivers –using a USB drive.

  Concert XR-4/6/8, XR-6S, and XR-8S receivers and Maestro X7/X9 and X7S/X9S processors: firmware update instructions Download Links: 4K XR-4, XR-6, XR-8 https://avproglobal.egnyte.com/fl/7bwxMJBPI3 4K X7, X9 ...

• Are Sub 1 and Sub 2 out on the Concert AVR 7/9 and M9/5 independent?

  Sub 1 and Sub 2 output on our AVR’s and pre processors are not independent. They are fed by the same sub channel. You can designate which pre output the AVR/pre processor outputs the sub channel via the Speaker Types tab on the On Screen Display: The ...

• My Maestro processor or Concert receiver is on the network, but Dirac cannot find it!

  First, make sure that the CONTROL setting in the setup menu is set to IP. Even if you will ultimately use RS-232 for control, the CONTROL setting needs to be set to IP in order for Dirac to see the processor or receiver on the network. For the ...