Can I mono the output of my Rialto 400 or 600?
Yes. With one exception. Both the Rialto 400 and 600 will NOT sum the left and right input when put into mono mode. It will derive the mono signal ONLY from the LEFT input.
On the Rialto 400 there is a switch on the bottom of the unit to switch between Mono and Stereo.
On the Rialto 600, you would flip the “Bridged” dipswitch.
Related Articles
Can I run the Rialto 400 in Bridged Mono mode?
Yes. The manual does not explicitly state that it can, but thru a couple of simple steps you can configure the amp to run a single mono speaker to achieve 400 Watts of power bridged. For a Digital Source: Switch both left and right channel Rialtos to ...
What is the difference between the Rialto 400 and Rialto 600?
The difference is in control. The Rialto 600 can be controlled via IR and RS232 control. The Rialto 400 can not. The Rialto 600 also has pre-amp volume control and 3 discrete inputs with a crossover. The Rialto 400 has signal sense, and a priority ...
What is the difference between a Bijou 600 and a Rialto 600?
The main difference is form factor. The Bijou 600 is in a more streamlined enclosure so it can be rack mountable. The other difference is the Bijou 600 has phoenix connectors for the speaker connections, whereas the Rialto 600 has standard 5 way ...
Bijou 600/Rialto 600: How to bypass the default turn on volume level
The Bijou 600 and Rialto 600 amplifiers have a turn on volume feature that defaults the amp to a lower volume level each time you power the amp on. If you want the amplifier to turn on at the last used volume level you can bypass the default volume ...
Analog line out & digital output: X / XR series processors and receivers
X series / XR series – analog line output & optical digital output The analog line output (next to Zone 2 output) is a fixed volume stereo output – audio from the analog, digital, and HDMI inputs can be routed to this analog output. Audio from the ...