Can I turn the front LED’s off on my Pantages G3 or my Savoy G3?

• Related Articles

• Savoy G3 amplifier input sensitivity switch settings.

  The Savoy G3 theater amplifier provides sensitivity settings so you can level match the input sensitivity of the Savoy G3 with the output voltage of your theater processor. The back panel input sensitivity switch has three options: A, B, & C. The ...

• Can I turn on/off RS-232 control from the front panel of an AVR/M processor?

  YES – By pressing and holding the DIRECT button for about 5 seconds. This will toggle RS-232 Control ON or OFF. If the Control setting is set to IP then pressing the DIRECT button for 5 seconds will set Control to OFF, pressing the Direct button ...

• Bijou 600/Rialto 600: How to bypass the default turn on volume level

  The Bijou 600 and Rialto 600 amplifiers have a turn on volume feature that defaults the amp to a lower volume level each time you power the amp on. If you want the amplifier to turn on at the last used volume level you can bypass the default volume ...

• How to bi-amplify your front left/right speakers: XR 4/6/8 receivers

  The AudioControl XR4, XR6 and XR8 home theater receivers allow you to assign internal amplifier channels 6 and 7 to power either Surround Back, Front Height, or Zone 2 speakers or you can choose to bi-amplify your Front left and right speakers. To ...

• How to bi-amplify your front left/right speakers: XR 4/6/8 receivers

  The AudioControl XR4, XR6 and XR8 home theater receivers allow you to assign internal amplifier channels 6 and 7 to power either Surround Back, Front Height, or Zone 2 speakers or you can choose to bi-amplify your Front left and right speakers. To ...