Dirac Live: Bass Control for X / XR series processors and receivers

• Related Articles

• Dirac Live: Volume Calibration makes a Ticking Noise

  In the Volume Calibration stage of Dirac, each channel should output a pink noise test tone, and the sub will output a short tone sweep. In some cases, you will hear the channels output a mysterious ticking noise. Trying to proceed through the ...

• Dirac Live: Bass Control for X / XR series processors and receivers

  The AudioControl Maestro X9 / X7 processors and Concert XR8 / XR6 / XR4 receivers are enabled with the Dirac Live Bass Control features. Please make sure your processor or receiver is running the latest firmware in order to have access to the Bass ...

• Dirac Live: Setup for X / XR series processors and receivers

  This tutorial was written with Dirac version 3.4.4. Later versions of Dirac might have slight variations to the process. If you see something that doesn’t match with what you read in this guide, please call AudioControl tech support. The process for ...

• Dirac Live: Setup for Maestro M5/M9 processors and AVR 7/9 receivers.

  Initial Setup Make sure the AVR 7/9 or M5/9 is connected to the same network as your computer. It doesn’t matter if the computer is connected via hardware or wifi, as long as it is on the same network. If your network is DHCP, the amplifier will ...

• Web Interface not responding on X / XR-series processors and receivers

  When you navigate to the IP address for your Maestro X series processor or Concert XR series receiver, you may find that changing the settings in the web interface does not affect any settings on the device. The web interface will not control the ...