How to split inputs on CM Series 70 volt amplifiers.
The CM series 70 volt amplifiers allow you to split the stereo inputs into separate input channels and then, using the matrix switching capabilities of these amplifiers, you can assign the individual inputs to any of the zone outputs.
To setup split inputs, open the settings menu by selecting the gear icon in the upper right corner of the web UI >
open Input Sources > select the Split checkbox for the stereo inputs you want to split. You will now notice that the inputs are separated in both the settings menu and the input drop down menu for each zone.
After splitting inputs you can name each input in the Input Sources section of the setup menu. After renaming the input be sure to save changes by selecting the checkmark next to the name. Name changes will also appear in the Input drop down list for each zone.
Related Links:
Firmware updates
If you need additional assistance, our Customer Service and Technical Support representatives are available Monday thru Friday 8am to 5pm PST. 425-775-8461.
Related Articles
How to setup SDS – Signal Detection Switching – on Director and CM-70 volt matrix DSP amplifiers.
The AudioControl Director Matrix series and CM 70 volt Matrix series amplifiers have a feature called SDS which stands for Signal Detection Switching. SDS allows you to connect the audio output of a doorbell system, home automation system, or a voice ...Dual Mode Amplification for CM series 70 volt amplifiers.
The article refers to the CM4-750, CM3-750, and CM2-750 70 volt amplifiers with Dual Mode Amplification. Dual Mode Amplification – The unique CM series amplifiers are designed to play into either high impedance 70 volt loads (Hi Z) or into ...Microphone Input Setup: CM Series 70 volt amplifiers.
The CM Series 70 Volt amplifiers can be setup for use with a microphone for paging applications. The Channel 1-2 analog input connector is used for the microphone connection. Connect the three wires of your XLR microphone – hot to “+”, neutral to ...How to bridge amp channels on the CM-series 70 Volt amplifiers
The CM2-750, CM3-750, and CM4-750 all have channels that can be bridged together to deliver more power to your speakers. If you need to provide power to 100V speakers, you need to use bridging to ensure you get enough power to your speakers. On the ...Firmware updates for CM series 70 volt amplifiers and RS500/RS1000 subwoofer amplifiers.
This article refers to firmware updates for the CM4-750, CM3-750, CM2-750 70 volt amplifiers and the RS500 and RS1000 subwoofer amplifiers. First, from the AudioControl website, you will need to download the latest firmware from the product page of ...