What are the rack mount options for the Bijou 600?

What are the rack mount options for the Bijou 600?

Although the Bijou 600 does not need to be rack mounted, it can easily sit on a shelf. That being said, most installs benefit from having the Bijou mounted.

There are 5 rack mount options for the Bijou 600.

RM-209 – Single Rack Mount

RM-210 – Dual Rack Mount

RM-211 – Surface Mounting Brackets

RM-212 – In Wall Back Box

RM-213  – Component Mounting Plate

You can also download a PDF of all options attached to this article.

Bijour 600 product page

    • Related Articles

    • What is the difference between a Bijou 600 and a Rialto 600?

      The main difference is form factor. The Bijou 600 is in a more streamlined enclosure so it can be rack mountable. The other difference is the Bijou 600 has phoenix connectors for the speaker connections, whereas the Rialto 600 has standard 5 way ...

    • Saving and Loading Settings Files for the Bijou

      The Bijou2100, 3100, and 5100D have many settings that can be adjusted to perfect your system, and it's recommended to save a backup of these settings in case there's a firmware update, a factory reset is needed, or you want to re-use these settings ...

    • Updating Firmware on the Bijou 2100, 3100, and 5100D

      The Bijou2100, Bijou3100, and Bijou5100D have 2 different kinds of firmware updates, an MCU and a DSP update. Firmware can be downloaded from the device's product page on www.audiocontrolpro.com, under the "Resources" tab. Save Device Settings A ...

    • Setup menu options for X / XR series processors and receivers

      To get started with setting up your new X series processor or XR series receiver you can access the setup menus directly from the front panel display of the unit or through a web browser by entering your processor or receivers IP address. The web ...

    • How to use the 12 volt trigger options on an Architect amplifier.

      Architect amplifiers have both local zone 12 volt trigger connections and Master 12 volt trigger connections. The Local zone connection is a 3.5mm TS input connector. The Master trigger connection is either the 3-pin block connector or the two 3.5mm ...