What speaker models are available for the speaker profiles on your new M series zone amplifiers?
We currently have 8 speaker manufacturers included in the program.
Clicking on the Speaker model will bring you to the product page on the companies website
They are:
| James Loudspeakers | Models: |
|
|
63SA-7HO | QXC820 (w/sub 8-Hz) | QXC620 (w/sub 8-Hz) |
|
Origin Acoustics | Models: |
|
|
D104 | D82 | D62 | D38 |
D106 | D84 | D64 |
|
D108 | D86 | D66 | Dsub6 |
| D88 | D68 |
|
| | | |
| Stealth Acoustics | Models: |
|
|
LR6G | LR3G | LR8G | B80 |
|
|
|
|
Triad Speakers | Models: |
|
|
InCeiling Bronze Sealed | InCeiling Silver Sealed | InCeiling Mini Sealed |
|
| | | |
Nuvo Speakers | Models: |
|
|
NV-2IC6 | NV-2IC6-ANG | NV-2IC6-DVC | NV-21C8 |
NV-21C8-ANG | NV-2IW6 | NV2IW5-LCR | NV-4IC6 |
NV-4IC6-ANG | NV-4IC6-DVC | NV-4IC8 | NV-4IC8-ANG |
NV-4IW6 | NV-4IW5-LCR | NV-6IC6 | NV-6IC6-ANG |
NV-6IC8 | NV-6IC8-ANG | NV-6IW6 | NV-6IW6-LCR |
| | | |
Monitor Audio | Models: |
|
|
CLG 140 | CLG160 | CLG-W12 (w/ CLG 140) | CLG-W12 (w/ CLG160) |
IV140 |
|
|
|
| Gray Speakers | Models: |
|
|
| C40 | C50 | S80 |
|
| Dynaudio | Models: |
|
|
| S4-C65 | S4-C80 | S4-W65 | S4-W80 |
Related Articles
How to upload speaker profiles to your Director, CM 70 volt, and RS series amplifiers?
This article refers to uploading speaker profiles for the Director and Director Matrix DSP amplifiers, the CM series 70 volt amplifiers, and for the RS500 or RS1000 subwoofer amplifiers. Where to find Speaker Profiles To upload the speaker profiles, ...
How do I control Zone 2 on my HTR-2 remote?
There is no dedicated “Zone 2” button on the HTR-2 remote. So in order to put the AVR in Zone 2 mode, the user would press and hold the “amp” button and “OK” button on the remote. The display would then change to show “Z2” and the volume and the ...
Firmware updates for CM series 70 volt amplifiers and RS500/RS1000 subwoofer amplifiers.
This article refers to firmware updates for the CM4-750, CM3-750, CM2-750 70 volt amplifiers and the RS500 and RS1000 subwoofer amplifiers. First, from the AudioControl website, you will need to download the latest firmware from the product page of ...
Firmware updates for CM series 70 volt amplifiers and RS500/RS1000 subwoofer amplifiers.
This article refers to firmware updates for the CM4-750, CM3-750, CM2-750 70 volt amplifiers and the RS500 and RS1000 subwoofer amplifiers. First, from the AudioControl website, you will need to download the latest firmware from the product page of ...
Controling Zone 2 on your X-series receiver/processor
The remote that comes with our X-series receivers and processors does not have a dedicated Zone 2 button. In order to put the AVR in Zone 2 mode, press the “AMP” and “OK” buttons on the remote at the same time. The display will change to show Zone 2, ...