Bijou 2100 / 3100 / 5100D
TV sometimes switches between eARC and built-in speakers
If your television repeatedly switches between eARC and the built-in TV speakers while connected to the Bijou2100, 3100, or 5100D, the issue can mostly likely be resolved by upgrading the HDMI cable. If a new cable isn't available changing the TV's ...
CEC controls on the Bijou
The Bijou 2100, 3100, and 5100D will always respond to CEC commands if connected to an ARC/eARC device via an HDMI cable and set to the eARC input. If the Bijou is in standby, it will turn on when the TV is powered on, and set itself to the eARC ...
Using the Bridged Sub Out on the Bijou5100D
Outputs 4 & 5 of the Bijou5100D can be bridged to power an 8 ohm subwoofer. Here's what you need to know to bridge the output. Physical Connection Connect the subwoofer's speaker wires to the positive (+) terminal on output 4 and the positive (+) ...
Saving and Loading Settings Files for the Bijou
The Bijou2100, 3100, and 5100D have many settings that can be adjusted to perfect your system, and it's recommended to save a backup of these settings in case there's a firmware update, a factory reset is needed, or you want to re-use these settings ...
Updating Firmware on the Bijou 2100, 3100, and 5100D
The Bijou2100, Bijou3100, and Bijou5100D have 2 different kinds of firmware updates, an MCU and a DSP update. Firmware can be downloaded from the device's product page on www.audiocontrolpro.com, under the "Resources" tab. Save Device Settings A ...